Injection Moulding / RTM

Filling & Fairing
Primers, Paints & Varnish
Gelcoats
Adhesives
Casting Systems
Filament Winding
Injection Moulding / RTM
Foaming Systems
Infusion Systems
Pre-preg Systems
Wet layup Systems
Pultrusion systems
Miscellaneous
Reinforcement Fabrics
Epoxy Systems
Polyurethane Systems
Polyester Systems
Vinylester Systems
All Products List

BrochureGeneral Catalogue
Our latest catalogue allows research on your specific market.. click here...

BrochureNew Marine Range Brochure
For all marine applications, click here...

Brochure New Tooling Brochure
click here...

 

Certain documents on this site are in PDF format. If you can't read them, download Acrobat Reader here.


 
1040
high performance epoxy laminating system
Advanced epoxy laminating system formulated to manufacture high performance structures with or without post-curing. The system is suitable for the manufacture of large structures and composite parts by contact, infusion and injection moulding. It features an adjustable working time from 15mn to 8 hours, a max. Tg of 144C, optimised viscosity and low toxicity to the user. It is possible to release the parts from the mould without post-curing (except with the HT & SL hardeners). The resulting structures will have an excellent resistance to high temperature. The system is also suitable for casting and filament winding applications.
Télécharger la fiche technique au format PDF (236.7 kb)


1050
HIGH PERFORMANCE EPOXY LAMINATING SYSTEM
Advanced epoxy laminating system formulated to manufacture high performance structures with or without post-curing. The system is suitable for the manufacture of large structures and composite parts by contact, infusion and injection moulding. It features an adjustable working time from 15mn to 10 hours, a max. Tg of 75C, optimised viscosity and low toxicity to the user. It is possible to release the parts from the mould without post-curing. The resulting structures will have very good mechanical properties. The system is also suitable for casting and filament winding applications.
Télécharger la fiche technique au format PDF (527.3 kb)


1080S
Highest Performance Epoxy Laminating & Infusion System
Resoltech 1080S is the highest module epoxy system formulated by Resoltech to manufacture high performance, rigid, lightweight structures with glass, carbon, aramid and basalt fibres with or without post-curing.
  • Highest module & rigidity epoxy system
  • Adjustable pot life from 30 min to 8 h 30
  • Room temperature mould release
  • Final TG up to 114 C

  • Télécharger la fiche technique au format PDF (807.5 kb)


    1450T Alu 25
    New Aluminium filled epoxy casting system
    RESOLCOAT 1450T ALU25 is an aluminium filled epoxy casting system formulated to produce parts or moulds from a few millimetres to several centimetres thick. It is used to produce moulds and tooling plugs. RESOLCOAT 1450T ALU25 combines ease of use, high thermal and mechanical properties as well as virtually no shrinkage.
    Télécharger la fiche technique au format PDF (277.9 kb)


    1800
    Structural Epoxy system for infusion & injection
    RESOLTECH 1800 is an advanced infusion and injection epoxy resin system with an extremely low viscosity for fast and safe wetout by infusion and injection. It features high mechanical properties, and a constant low viscosity right until gel time. It therefore offers reliable impregnation and air release throughout the infusion or injection process. Suitable for very large composite parts. It is suitable for both tooling and parts manufacturing. Typical applications include large marine structures, wind turbine blades, moulds for pre-preg production.
    Télécharger la fiche technique au format PDF (627.1 kb)


    6410
    Fast Curing Structural Epoxy Laminating System
    The 6410 System is a high performance epoxy laminating system that will work in adverse conditions of high humidity and low temperatures. Its main characteristics of low viscosity combined with a fast gel time at room temperatures makes the 6410 system a prime choice for renovation of pipes and drains as well as for marine applications or any winter application. Even in low applications temperatures such as 10C, the resin & hardener stays workable unlike other epoxies that would have a honey-like consistency at such low temperatures.
  • Versatile laminating system for all-weather working conditions
  • Room temperature curing
  • Low viscosity for easy impregnation even at low temperatures.

  • Télécharger la fiche technique au format PDF (723 kb)


    HTG160
    • High TG160C • Low viscosity and high wetting out properties • High interlaminar & impact resistance properties
    RESOLTECH HTG 160 / HTG 165 epoxy system is very high TG infusion resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 160C. This new generation system, optimized with low viscosity, high wetting roperties and excellent air release, is suitable for the manufacture of large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users. The stable low viscosity vs temperature makes of the HTG 160 system a prime choice for infusion process.
    Télécharger la fiche technique au format PDF (332.1 kb)


    HTG180
    High TG Structural Infusion Epoxy Systems • High TG 180C • Low viscosity and high wetting out properties
    RESOLTECH HTG 180 / HTG 185 epoxy system is very high TG infusion resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 180C. This new generation system, optimized with low viscosity, high wetting properties and excellent air release, is suitable for the manufacture of large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users. This system guarantees high inter-laminar properties and impact resistance thanks to its exceptional wetting properties even on aramid reinforcements.
    Télécharger la fiche technique au format PDF (284.5 kb)


    HTG200
    High TG Structural Infusion Epoxy Systems • High TG 200C • Low viscosity and high wetting out properties
    RESOLTECH HTG 200 / HTG 205 epoxy system is very high TG resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 200C. Due to its low viscosity, high wetting properties and excellent air release, is suitable for the anufacture of structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users. The stable low viscosity vs temperature makes of the HTG 200 system a prime choice for infusion process. This system guarantees high inter-laminar properties and impact resistance thanks to its exceptional wetting properties even on aramid reinforcements.
    Télécharger la fiche technique au format PDF (304.1 kb)


    HTG240
    High TG Structural Infusion Epoxy Systems

    RESOLTECH HTG 240 / HTG 245 epoxy system is very high TG resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 240C.

    Due to its low viscosity, high wetting properties and excellent air release, is suitable for the manufacture of structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users.


    Télécharger la fiche technique au format PDF (607.6 kb)


    | home | news | markets | products | downloads | about us | distributors | links | contact |
    © 2015 Resoltech - All rights reserved
    version française english version