Applications of 1070 ECO for Filament Winding, Injection Moulding / RTM and Wet layupApplications of 1070 ECO for Filament Winding, Injection Moulding / RTM and Wet layup

RESOLTECH 1070 ECO

Hardener 1074 ECO

Bio-sourced Clear Lamination Epoxy System

  • 31% Bio-sourced epoxy resin system (ASTM D6866-12)
  • Room temperature cure & mould release
  • TG up to 73°C
  • Excellent wetting properties on all reinforcements
  • For structural laminates and top-coats

eb l1 logo whitespace

RESOLTECH 1070 ECO is a high end crystal clear epoxy laminating system formulated to produce clear laminates and high gloss clear coatings with good UV stability and high mechanical properties.

The 1070 ECO system is a state of the art formulation using two key elements in it bio composition: a partially bio sourced epoxy resin with an plant based reactive diluent, obtaining the highest available bio content without compromising the mechanical characteristics of a structural epoxy system.

The resulting laminates will be absolutely clear on carbon fibre and even transparent if applied on special Hexcel Silionne E- glass fabrics with TF970 treatment.

The viscosity is adapted for squeegee, brush or roller application, and enables to make perfect bubble free surface due to its surface tension properties. The 1070 ECO system has been formulated in order to leave virtually no free amines on the laminate. This even enables the use of any quality polyester finish coat for quick sanding on top of the laminate without inhibition of the polyester.

TG (°C)
88
Mix viscosity (mPa.s)
700
Gel time on 70 mL, 4cm at 23°C
28m