RESOLCOAT 7060 epoxy gelcoat is specially formulated for the production of structural composites parts or tools requiring high mechanical & abrasion properties and room temperature curing.
Two versions are available depending on the pot life needed : 1h45min for large parts or 16min for high production outputs, with a very fast curing time in film for the fast version - closer to a polyester curing time than to a typical epoxy.
In both cases, the gelcoat may be ordered in its clear version (mainly for parts) or coloured version for tools or parts production.

500 microns (0,57 kg/m2) is sufficient coating thickness in most cases. For parts or moulds requiring polishing or finishing a 800 microns (0,92 kg/m2) is recommended. This gelcoat offers low toxicity working conditions to the users. Laminates can be released from the moulds after a room temperature curing.