Applications of 4030W (THIX) for Primers, Paints and Varnish and GelcoatsApplications of 4030W (THIX) for Primers, Paints and Varnish and Gelcoats


Hardeners 4034W 4036WM

Water-based epoxy paint

  • Ease of use of water based products
  • Ready to use kits, neutral base with RAL pigments availables
  • Brush, roller or spraygun application
  • High gloss or mat depending on hardeners
  • High mechanical and chemical resistances
  • Gel version for «in mould» applications

Miscible with water up to 50% in volume, this solvent free topcoat formula is used to achieve a painted finish, glossy (4034W hardener) or matte (4036W hardener), on numerous materials, steel, concrete or composites.

Application is easily done with a brush, roller or spraygun.

Because of its insensitivity to moisture, no cloudy layer may build up, even under high ambient humidity levels. Low surface tensions of the film raise degassing and help to get a smooth finish.

Covering power is on the high side, as well as oil, acid and wear resistance. Those properties make 4030 W the preferred solution for bilges or industrial floors protection.

The THIX (for thixotropic) version has been developed as an alternative product to polyester gel­coats, highly resistant to sagging on vertical plane. After demoulding, surface is perfectly closed, without any pinhole defects which have a detrimental effect on finish. Once lightly deglazed, surface is ready for a lacquered finish, saving a huge number of coating and sanding hours.

Always concerned about HSE matters, Resoltech formulatad the 4030W system without any CMR coponents or COVs.

Mix density
Gel time on 70 mL, 4cm at 23°C