RESOLTECH 4000 CLEAR / 4006 is a clear epoxy coating system formulated to produce high gloss coatings with the best possible UV stability for an epoxy system - with all the high mechanical characteristics epoxies offer compared to other coatings.

The system is formulated for the coating of all type of surfaces with high-end finish aspects requirements for inside or outside exposure such as surfboards, art pieces, outdoor furniture...etc...

One only coat should be necessary as the film is thick enough.
Should a second coat be applied, sanding is required between coats unless the second coat is applied within the first coat curing time.

On wood or other porous materials, it is recommended to work in descending temperatures so air does not release while the 4000 CLEAR / 4006 is curing.
To avoid air release & entrapment while curing on porous materials, a layer of RESOLCOAT 1010 / 1014 water based epoxy primer may be used.

The system 4000 CLEAR / 4006 can be tinted with pigment and transparents dyes. It is necessary to check the compatibility epoxy/pigment or dye beforehand. Resoltech offer a full range of solid colours pigments or transparent dyes.

RESOLTECH 4000 CLEAR / 4006 has been formulated in order to avoid leaving any free surface amines, allowing to be topcoated without problems with a polyester or a polyurethane varnish - or for best UV protection by the Resoltech 3200 acrylic varnish offering both UV & hydrolysis resistance.