Applications of 2010 FGCS for GelcoatsApplications of 2010 FGCS for Gelcoats


Hardener 2014 FGCT

Self extinguishing epoxy gelcoat

  • Self-extinguishing epoxy that complies with marine, aerospace & building industry standards.
  • High quality finish
  • Very high UV resistance

RESOLTECH 2010FGCS-2014 FGCT is a self-extinguishing epoxy gelcoat that complies with the OMISOLAS 2000 directive, FAR 25 853 and M2 classifications.

Thanks to its application characteristics, it is suitable for the application of both simple and complex shapes.

The proportions of the 2014 FGC hardener system are 19.5 parts for each 100 parts of resin weight. Usable working time is 45 minutes and it gives a temperature of vitreous transition of up to 75ºC. Once hardened, the parts can be released from the mould without post-curing.

The optimal thermo mechanical properties are obtained after an adapted cycle of curing. However, post curing is NOT essential depending on the final use of the parts.

The gelcoat 2010 FGCS is available in white as standard or in neutral with all RAL color with pigments.

The 2010FGCS offers a good UV resistance for an epoxy gelcoat.

TG (°C)
Mix density
Mix viscosity (mPa.s)
Gel time on 70 mL, 4cm at 23°C