Casting Systems

Filling & Fairing
Primers, Paints & Varnish
Gelcoats
Adhesives
Casting Systems
Filament Winding
Injection Moulding / RTM
Foaming Systems
Infusion Systems
Pre-preg Systems
Wet layup Systems
Pultrusion systems
Miscellaneous
Reinforcement Fabrics
Epoxy Systems
Polyurethane Systems
Polyester Systems
Vinylester Systems
All Products List

BrochureGeneral Catalogue
Our latest catalogue allows research on your specific market.. click here...

BrochureNew Marine Range Brochure
For all marine applications, click here...

Brochure New Tooling Brochure
click here...

 

Certain documents on this site are in PDF format. If you can't read them, download Acrobat Reader here.


 
1060 ES7
INJECTION & CASTING EPOXY SYSTEM FOR ELECTRICAL INSULATION
RESOLTECH 1060 ES7 is an epoxy system formulated to insulate electric and electronic connections. The system provides excellent insulating properties and ease of use. It is nonflammable, does not shrink, cures without any evaporation, does not degrade electronic components and cures in an enclosed volume. RESOLTECH 1060 ES7 is also available in a slower, non exothermic version called 1060E7.
Télécharger la fiche technique au format PDF (225.4 kb)


1600
New Flexible Epoxy System

The 1600 1606 system results of the latest advances in epoxy chemistry formulation and enables to obtain a flexible epoxy without plasticizers, retaining all the added values of epoxy resins: high adhesion, high toughness, but none of the aging issues that plasticizers created in the older flexible formulations. The latest system is a high performance epoxy laminating system that cures at room temperature. It is formulated for the realisation of flexible laminates that need a high flexibility and good chemical resistance.

  • Flexible laminating system
  • Room temperature curing
  • High impact resistance

  • Télécharger la fiche technique au format PDF (534.5 kb)


    2010
    Multipurpose Casting Epoxy System
  • Adjustable pot life from 10 h to 15 min.
  • Room temperature cure & mould release.
  • Excellent air release properties.
  • Thanks to its low viscosity and low exothermy, this system enables casting by gravity or under vacuum, with the incorporation of any kind of charges


    Télécharger la fiche technique au format PDF (375.3 kb)


    2010FC
    EPOXY SELF-LEVELLING DECK COATING
    Self extinguishing, self leveling. Corrosion resistant. High adhesion to metals. Replaces cement based products.
    Télécharger la fiche technique au format PDF (106.7 kb)


    2010HP
    Low density Epoxy Casting System
    A Low density casting epoxy system with low exothermic peak, ambient temperature curing between 15 minutes to 10 hours depending on hardner
    Télécharger la fiche technique au format PDF (193.4 kb)


    2050 BL
    Epoxy system for casting, chocking & injection
    The RESOLTECH 2050BL is a high performance epoxy casting system suitable for casting & choking ranging from a few millimeters to several centimeters without shrinkage.
    Télécharger la fiche technique au format PDF (107 kb)


    2060 ALU 25
    EPOXY CASTING SYSTEM
    RESOLCOAT 2060 is an epoxy casting system formulated to produce parts or moulds from a few milimetres to several centimeters thick. It is used to produce moulds and tooling plugs. RESOLCOAT 2060 combines ease of use, thermal and mechanical properties as well as virtually no shrinkage.
    Télécharger la fiche technique au format PDF (375.5 kb)


    2060 GC ALU
    Tooling Aluminium Epoxy Gelcoat
    RESOLCOAT 2060 GC ALU epoxy gelcoat is formulated for the production of composites tooling. It enables to manufacture tooling that will resist many years to the most demanding heating and cooling post-curing cycles of: heating RTM & pre-preg tooling, high output heat forming of thermoplastics or polymer concrete/solid surface injection tools.
  • High gloss surface
  • For demanding heat cycles post cures & thermo forming
  • High modulus & mechanical properties
  • TG 115C

  • Télécharger la fiche technique au format PDF (598.1 kb)


    2080 M25
    Structural Epoxy Foaming system
    RESOLTECH 2080 M25 is a liquid foaming epoxy casting system formulated to produce low density, closed cell, strutural cores. The slow, controled foaming reaction negates the use of mixing machines normally associated with PU foams – The low pressure of the foaming system will enable direct casting within the final parts with no conforming moulds and without alteration to the dimensions of the final composite piece. This system is available in black, white or neutral colour (to be pigmented with any colour)
    Télécharger la fiche technique au format PDF (590.3 kb)


    2080 M40
    Structural Epoxy Foaming System

    RESOLTECH 2080 M40 / 2084M is a liquid foaming epoxy casting system formulated to produce low density, closed cell, structural cores.

    RESOLTECH 2080 M40 / 2084M has a free expansion coefficient of 3, enabling the production of 400 kg/m3 epoxy foam. The slow, controlled foaming reaction makes unnecessary the use of mixing machines like with PU foams – the low pressure of the foaming will enable direct casting in the final parts with no conforming moulds without alteration of the dimensions of the composite. This system is available in neutral (white) colour or may be pigmented with any RESOLTECH RAL colour pigment paste.


    Télécharger la fiche technique au format PDF (722.2 kb)


    6410
    Fast Curing Structural Epoxy Laminating System
    The 6410 System is a high performance epoxy laminating system that will work in adverse conditions of high humidity and low temperatures. Its main characteristics of low viscosity combined with a fast gel time at room temperatures makes the 6410 system a prime choice for renovation of pipes and drains as well as for marine applications or any winter application. Even in low applications temperatures such as 10C, the resin & hardener stays workable unlike other epoxies that would have a honey-like consistency at such low temperatures.
  • Versatile laminating system for all-weather working conditions
  • Room temperature curing
  • Low viscosity for easy impregnation even at low temperatures.

  • Télécharger la fiche technique au format PDF (723 kb)


    Aluminum 250 TV
    FINE ALUMINIUMMINUM POWDER/FILLER

    The ALUMINIUM 250TV is an ALUMINIUMminium powder with average particle size of 60 m.

    The ALUMINIUM 250TV maybe used as filler for the 2060 ALUMINIUM 25 or the 1450T ALUMINIUM in order to increase the filler content these casting resins and transform them into thick pastes & improve the thermal conductivity of these casting resins.


    Télécharger la fiche technique au format PDF (520 kb)


    WWA
    CLEAR EPOXY CASTING SYSTEM
    Resoltech WWA is a unique epoxy system formulated for decorative applications and castings. It is totally clear, UV stabilized, not solvented and compatible with glass. Excellent optical properties. No shrinkage.
    Télécharger la fiche technique au format PDF (528.6 kb)


    | home | news | markets | products | downloads | about us | distributors | links | contact |
    © 2015 Resoltech - All rights reserved
    version française english version