Gelcoats

Filling & Fairing
Primers, Paints & Varnish
Gelcoats
Adhesives
Casting Systems
Filament Winding
Injection Moulding / RTM
Foaming Systems
Infusion Systems
Pre-preg Systems
Wet layup Systems
Pultrusion systems
Miscellaneous
Reinforcement Fabrics
Epoxy Systems
Polyurethane Systems
Polyester Systems
Vinylester Systems
All Products List

BrochureGeneral Catalogue
Our latest catalogue allows research on your specific market.. click here...

BrochureNew Marine Range Brochure
For all marine applications, click here...

Brochure New Tooling Brochure
click here...

 

Certain documents on this site are in PDF format. If you can't read them, download Acrobat Reader here.


 
1070 ECO
Bio-sourced Clear Lamination Epoxy System
RESOLTECH 1070 ECO is a high end crystal clear epoxy laminating system formulated to produce clear laminates and high gloss clear coatings with good UV stability and high mechanical properties.
Télécharger la fiche technique au format PDF (332.9 kb)


1070S
CLEAR EPOXY LAMINATING SYSTEM
RESOLTECH 1070S is a clear epoxy laminating system formulated to produce clear laminates, coats or fillers with good UV stability. RESOLTECH 1070S is easy to use, cures at ambient temperature and is self leveling.
Télécharger la fiche technique au format PDF (707.5 kb)


2010FGCS
Self-extinguishing epoxy gelcoat - conforming to marine, aeronautical and building construction regulations
RESOLTECH 2010FGCS-2014 FGC is a self-extinguishing epoxy that complies with the OMI-SOLAS 2000 directive. Thanks to its viscosity, it is suitable for the application of both simple and complex forms. Once hardened, the parts can be released from the mould without post-curing. The optimal thermomechanical properties are obtained after an adapted cycle of curing. However, postcuring is NOT essential depending on the final use of the parts.
Télécharger la fiche technique au format PDF (249.1 kb)


3300
EPOXY ADHESIVE
RESOLTECH 3300 is a high chemical resistance epoxy adhesive that can be applied onto dry or damp surfaces but also underwater. RESOLTECH 3300 is used to seal, bond or repair a large selection of materials, including fiberglass, aluminium, steel, concrete and ABS plastics.
Télécharger la fiche technique au format PDF (162.2 kb)


4070AL
ANTI CORROSION - FOOD GRADE - EPOXY COATING

RESOLCOAT 4070AL epoxy coating is formulated in replacement of older systems containing aromatic nucleus that are no longer legal to use since the REACH implementation in EU. RESOLCOAT 4070 AL is a 100% dry extract anti-corrosion epoxy coating formulated to provide maximum resistance to chemicals agents. It is designed to be used as a protective liner for tanks and machinery in contact with food products. The system has a short hardening time in film enabling fast applications and reduced down time of existing installations. it is non-flammable and provides a smooth, non-porous high gloss finish. The 4070AL is indicated for all Food grade applications . Solvent less, it will not transmit any flavour or odour to the food that will be in contact with the coating.

• New Formula, REACH certified. • Fast hardening in film. • Excelent chemical resistance.


Télécharger la fiche technique au format PDF (123 kb)


4090 AL
Food - Grade Epoxy Coating

RESOLCOAT 4090 AL epoxy coating is formulated in replacement of older systems containing aromatic amines which can cause health problems among workers.

RESOLCOAT 4090 AL is a 100% dry extract anti-corrosion epoxy coating formulated to provide maximum resistance to chemicals agents. It is designed to be used as a protective liner for tanks and machinery in contact with food products.

This coating is in compliance with FDA - CFR 175.300 for 8% Alcohol at 120F (49C) / 24h.


Télécharger la fiche technique au format PDF (436.5 kb)


7060
EPOXY GELCOAT SYSTEM
RESOLCOAT 7060 is an epoxy gelcoat available in a wide range of colours. It provides a good finish, UV stability, ambient temperature cure and high mechanical properties. It is solventless and can be applied by spraygun, roller or brush.
Télécharger la fiche technique au format PDF (513 kb)


7090
High TG Epoxy GELCOAT
RESOLCOAT 7090 is a high temperature resistant epoxy gelcoat, suitable for prepreg and other high temperature applications requiring a TG of 150C. This system is solvent free and can be applied by spray or hand.
Télécharger la fiche technique au format PDF (561 kb)


9040PX
POLYESTER GELCOAT EPOXY COMPATIBLE
RESOLCOAT 9040PX is a polyester gelcoat available in a wide range of colours. Its special formulation allows for good adhesion properties with epoxy resin systems. RESOLCOAT 9040PX combines the advantages of the perfect surface finish of a polyester gelcoat with the superior mechanical performance of an epoxy laminate.
Télécharger la fiche technique au format PDF (221.6 kb)


Aluminum 250 TV
FINE ALUMINIUMMINUM POWDER/FILLER

The ALUMINIUM 250TV is an ALUMINIUMminium powder with average particle size of 60 m.

The ALUMINIUM 250TV maybe used as filler for the 2060 ALUMINIUM 25 or the 1450T ALUMINIUM in order to increase the filler content these casting resins and transform them into thick pastes & improve the thermal conductivity of these casting resins.


Télécharger la fiche technique au format PDF (520 kb)


Epoxy Pigment Pastes
All RAL colours available
Resoltech epoxy concentrated pigment pastes consist of pigments suspended in epoxy resin which allows them to blend thoroughly into epoxy resins to make very uniform colours. They are used to tint epoxy resins used as coatings, paints, gelcoats, laminating, casting or self levelling resins. The high tinting properties enable to use little quantities of pigment. The quantity to be used depends on the colour chosen as some colours cover better than other (yellows for example need higher quantities that other colours).
Télécharger la fiche technique au format PDF (274.1 kb)


IFRIT PR01

IFRIT PR01 is a high performance fire & heat protection material. It behaves as an active insulating coating, reacting to heat by developing an endothermic reaction without releasing any pollutants. The system may be applied onto composite materials, metal and other surfaces using a notched spreader or sprayed with an airless.
Télécharger la fiche technique au format PDF (170.9 kb)


VI5080
RESOLCOAT VINYLESTER COATING
RESOLCOAT VI 5080 is a vinylester coating that combines very high chemical resistance with superior temperature resistance. VI 5080 was formulated for the protection of tanks, pipes and systems in contact with highly corrosive substances. It contains mica flakes. Its ease of use and durability make it an ideal coating for severe anti corrosion applications.
Télécharger la fiche technique au format PDF (218.6 kb)


VI5090
Vinylester Gelcoat Epoxy Compatible
The VI5090 is a high resistance Gelcoat formulated on a Vinylester resin base. Its main characteristics are a very high resistance to solvents and chemical agents, which makes it an excellent product for tooling, but also its high TG of 105 degrees makes it a product of choice for Pre-preg parts For tooling, the VI 5090 enables the mould to have a permanent high gloss aspect resisting to many cycles between waxing/polishing. Thanks to its low dilatation module when exposed to temperature and its flexibility, the VI5090 is not prone to cracks and the appearance of mat zones. The VI 5090 comes in a Neutral (transparent) Color but can be delivered in any RAL color or with RAL pigments
Télécharger la fiche technique au format PDF (61.5 kb)


VLSUV
EPOXY VARNISH-LACQUER CLEAR & FLEXIBLE
RESOLCOAT VLS UV is a clear and UV stable epoxy varnish formulated to produce high gloss thick coatings to enhance wood or other supports. It is waterproof, easy to apply in films 1mm to 4mm thick. It combines low toxicity, high mechanical and abrasion resistance.
Télécharger la fiche technique au format PDF (213.8 kb)


| home | news | markets | products | downloads | about us | distributors | links | contact |
© 2015 Resoltech - All rights reserved
version française english version