Applications of 8010 W for Filling & Fairing and Primers, Paints and VarnishApplications of 8010 W for Filling & Fairing and Primers, Paints and Varnish

RESOLTECH 8010 W

Hardener 8014 W

Water based sprayable epoxy filler

  • Models/patterns making
  • Direct moulds
  • Room temperature curing
  • Very easy to sand

RESOLTECH 8010 W / 8014 W system results of the latest advances in epoxy chemistry formulation and eliminates all solvents used normally with sprayable primers and fillers, replacing them with water, thus improving the H&S conditions for workers.

8010 W enables to produce models or direct moulds on any type of support previously milled by CNC or by hand.

The 8010 W may be sprayed with (3,5 mm nozzle) gravity spray guns, applied by brush or with a flat spatula. The fast drying characteristics and ease of sanding make it possible to apply various layers per day.

It is best to apply the water based epoxy paint RESOLTECH 4030W / 4034W as topcoat to close the surface and enable to laminate on the 8010 W. Other lacquers may also be used.

It is recommended to apply coats of up to 1mm max in order to avoid surface defects. Sanding with 120/240/400 grits is very easy. The 8010 W may be applied on low density EPS and all foams in general. If walking on the model/plug is necessary due to the size of the part, a lamination of 2 layers of glass fibre may be deemed as necessary in order to support the weight of the workers, depending on foam density.

TG (°C)
55
Mix density
0.74
Mix viscosity (mPa.s)
1,300 - 100,000
Gel time on 70 mL, 4cm at 23°C
30m