Applications of 2010 FCI for CastingApplications of 2010 FCI for Casting

RESOLCOAT 2010 FCI

Epoxy self-levelling deck coating

  • Self-extinguishing
  • Self-leveling
  • Corrosion resistance
  • High adhesion to metals
  • Replaces cement based products

APPLICATION

  • The standard procedure of working with epoxy systems applies to the RESOLTECH 2010 FCI.
  • The resin part (2010FC) should always be stirred thoroughly before use.
  • Temperature of application: Around 20ºC will improve the handling of the system. Low temperatures will increase viscosity and curing time.
  • The metal surface should be clean, degreased and dustfree. A light abrasion will improve the adhesion of the system. For aluminium decks, a chemical treatment or sandblasting is required.
  • Avoid curing the system at high temperatures as it may generate tension problems.
  • For more information, please refer to the applications technical bulletins (TechNotes), available on request.
  • Film thickness: Up to 10mm.

CURING

Application conditions: 18 to 25ºC, 70% humidity maximum. Do not apply in temperatures lower than 10ºC.

Pot-life for 100g:4 Hours
Walking over: 24 hours at 23ºC
Full use: 72 Hours

TG (°C)
65
Mix density
1.2
Mix viscosity (mPa.s)
1,100