Applications of Liquid Resin Art A for Primers, Paints and VarnishApplications of Liquid Resin Art A for Primers, Paints and Varnish


Liquid Resin Art B

Epoxy clear coating system

  • Very high gloss topcoat & varnish
  • Room temperature curing
  • Self levelling
  • New anti-UV formula
  • Thick layer up to 5mm
  • 3D floors

LIQUID RESIN ART A / B is a clear epoxy coating system formulated to produce high gloss finish with all the high mechanical characteristics epoxies offer compared to other coatings.

The system is formulated for the coating of all type of surfaces with high-end finish aspects requirements for inside exposure such as floors, countertops, art pieces, ...

One only coat should be necessary as the film is thick enough.
Should a second coat be applied, sanding is required between coats unless the second coat is applied within the first coat curing time.

On wood or other porous materials, it is recommended to work in descending temperatures so air does not release while LIQUID RESIN ART A / B is curing.
To avoid air release & entrapment while curing on porous materials, a layer of 1010 / 1014 water based epoxy primer should be used.

TG (°C)
Mix density
Mix viscosity (mPa.s)
Gel time on 70 mL, 4cm at 23°C