Applications of 7060S CLEAR for Applications of 7060S CLEAR for

RESOLCOAT 7060S CLEAR

Hardeners 7064 & 7067

  • Fast version of 7060 Clear
  • Improved UV resistance
  • Room temperature cure & high gloss
  • Choice of slow and fast hardeners

RESOLCOAT 7060S Clear epoxy gelcoat is specially formulated for the production of structural composites parts or tools requiring high mechanical & abrasion properties and room temperature curing.

Two versions are available depending on the pot life needed : 1h45min for large parts or 16min for high production outputs, with a very fast curing time in film for the fast version - closer to a polyester curing time than to a typical epoxy.
In both cases, the gelcoat may be ordered in its clear version (mainly for parts) or colored version for tools or parts production.

500 microns (0,57 kg/m2) is sufficient coating thickness in most cases. For parts or molds requiring polishing or finishing a 800 microns (0,92 kg/m2) is recommended.
This gelcoat offers low toxicity working conditions to the users. Laminates can be released from the molds after a room temperature curing.

TG (°C)
56
Mix density
1.14
Mix viscosity (mPa.s)
15,000 - 20,000
Gel time on 70 mL, 4cm at 23°C
10m - 2h