Applications of 8030 for Applications of 8030 for

RESOLTECH 8030

Hardeners 8033, 8035 & 8037

Epoxy profiling filler

  • Mixing ratio 1/1 in volume or 2/1 by weight
  • Room temperature curing
  • Non sag up to 40 mm thickness application @ 20°C

Resoltech 8030 is the best choice for profiling above and below the waterline on Steel, Aluminium and Composite hulls. The specially formulated light grey epoxy can fill up to a thickness of up to 4 cm in one coat without the risk of sagging/slumping.

* Low density composition
* High strength and impact resistance
* Easy sanding
* Waterproof

When sanded, the surface of the 8030 is smooth enough to be directly overcoated with Resolcoat 3010T high build epoxy primer. Resoltech 8020 EX may also be used for surface defects up to 2 mm.

Resoltech 8030 is particularly suitable for application over large areas.

It´s excellent waterproof quality enables to guarantee long lasting barriers when used as Osmosis treatment.

Easy to sand or mill with CNC, Resoltech 8030 may be used as profiling filler on low density foams blocks for plugs manufacturing.

TG (°C)
65
Mix density
0.74
Gel time on 70 mL, 4cm at 23°C
30m - 2h45m