Applications of 7060S COLORED for Applications of 7060S COLORED for


Hardeners 7064 & 7067

  • Many RAL colors available
  • Improved UV resistance
  • Room temperature cure & high gloss
  • Choice of Slow and Fast hardeners

RESOLCOAT 7060(S) COLORED epoxy gelcoat is specially formulated for the production of structural composites parts or tools requiring high mechanical & abrasion properties and room temperature curing.

Two versions are available depending on the pot life needed : 1h45min for large parts or 16min for high production outputs, with a very fast curing time in film for the fast version - closer to a polyester curing time than to a typical epoxy.

In both cases, the gelcoat may be ordered in its clear version (mainly for parts) or coloured version for tools or parts production.

Many RAL colors are available, please refer to Pigments product page.

500 microns (0,57 kg/m2) is sufficient coating thickness in most cases. For parts or moulds requiring polishing or finishing a 800 microns (0,92 kg/m2) is recommended.

This gelcoat offers low toxicity working conditions to the users. Laminates can be released from the moulds after a room temperature curing.

TG (°C)
Mix density
Mix viscosity (mPa.s)
10,000 - 15,000
Gel time on 70 mL, 4cm at 23°C
10h - 1h45m