1010
A unique water based epoxy system.
RESOLCOAT 1010 is a unique water based epoxy system. It may be used in a very large number of applications such as primer, varnish, veneer adhesive but also as matrix for self levelling compounds or mortars. Domains of application range from marine construction, furniture manufacturing, industrial & residential construction and fine arts.
Apart from hydrophobic subtracts, the 1010 system is compatible with most supports such as wood, concrete, plaster, stone, ceramic, metal..etc. It can be highly diluted in water so its viscosity can result extremely low, resulting in a prime choice material for priming. It is used as wood primer on new woods & timbers but also as hardening material when applied of injected in old woods for conservation or purposes. Less diluted, it becomes a transparent varnish highly resistant to abrasion. It will enhance the colour of woods and other materials such as ceramics or carbon fibre.
Applied in maximum 2 thin layers, it’s micro-porosity to vapour will enable the 1010 to be used as a water barrier for materials that need to breath (wood, concrete).
 Télécharger la fiche technique au format PDF (480.7 kb) 
|
1020
Structural epoxy resin system for wood
RESOLTECH 1020 is a advanced epoxy laminating system for wood-epoxy constructions. It may be used for: all woods laminations, coating, scarfing, strip planking, as well as bonding in form of fillet joints applications when filled with wood flour and silica.
Thanks to its low viscosity and a wide range of hardeners (15 min to 10hours), it allows applications in both traditional wet layup, vacuum bagging or under press. A thixotropic version , the 1020T is available for vertical or overhanging applications prone to dripping.
Télécharger la fiche technique au format PDF (318.7 kb)
|
1020T
THIXOTROPIC WOOD EPOXY SYSTEM
RESOLTECH 1020T is a pregel wood adhesive system optimised for the manufacture of laminated wood parts and structures. It provides ease of use, low toxicity to the user, good impregnation of the timber surface, high mechanical performance of the cured structure and an adjustable working time. 1020T makes bonds that are stronger than the timber itself, enhancing its mechanical properties and producing long lasting heavy duty structures for marine, building and engineering applications.
Télécharger la fiche technique au format PDF (103.1 kb)
|
1030H
Wood-Epoxy Construction
RESOLCOAT 1030H is a high performance clear varnish formulated for
wood coating applications. It will produce a tough, high gloss & UV
stable coating enhancing the finish of the wood.
The system can also be used to laminate clear glass over wood.
Télécharger la fiche technique au format PDF (204.9 kb)
|
1040 - (1045N 1048N)
High Performance Epoxy Laminating System
Advanced epoxy laminating system formulated to manufacture high performance lightweight structures with glass, carbon, aramid and basalt fibers with or without post-curing. This new generation system, optimised with a low reactivity, low viscosity and excellent air release properties, is suitable for the manufacture of large structures and composite parts by contact, infusion and injection moulding while guaranteeing low toxicity working conditions to the user. It features an adjustable working time from 20mn to 3 hours and 20 minutes with two hardeners that can be pre-blended together to precisely adjust the pot life thanks to their identical mixing ratio of 100:30 and perfect compatibility. It is possible to release the parts from the mould without post-curing.
Télécharger la fiche technique au format PDF (204.7 kb)
|
1040 - (1405)
Infusion Epoxy Resin system
RESOLTECH 1040 - 1405 is an epoxy resin system formulated for infusion applications. It enables to manufacture structural composites parts with all existing reinforcement fabrics.
Thanks to its low viscosity and high wetting properties, it can be used by hand lay-up or via infusion, vaccum bagging and RTM. Once reticulated at ambient temperature, the parts should be post-cured according to the thermal cycle indicated in this datasheet in order to obtain the maximum mechanical properties of this resin system. It’s TG of 150°C enables the realisation of high quality and performance parts as well as tooling for prepreg parts.
Télécharger la fiche technique au format PDF (106.7 kb)
|
1050
HIGH PERFORMANCE EPOXY LAMINATING SYSTEM
Advanced epoxy laminating system formulated to manufacture high performance structures with or without post-curing. The system is suitable for the manufacture of large structures and composite parts by contact, infusion and injection moulding. It features an adjustable working time from 15mn to 10 hours, a max. Tg of 75°C, optimised viscosity and low toxicity to the user. It is possible to release the parts from the mould without post-curing. The resulting structures will have very good mechanical properties. The system is also suitable for casting and filament winding applications.
Télécharger la fiche technique au format PDF (288.5 kb)
|
1050MX2
FOAMING EPOXY SYSTEM
RESOLTECH 1050 MX2 is an epoxy foaming system formulated to laminates over rough foam surfaces and fill small gaps. It can be used by casting, injection, projection and laminating.
RESOLTECH 1050 MX2 combines ambient temperature use and cure, low exothermy, variable working time, low viscosity and high mechanical performance. RESOLTECH 1050 M is suitable for the manufacture of complex shaped laminates such as rudders, fins, paddles. RESOLTECH 1050 M does not contains any CFC or banned chemical.
Télécharger la fiche technique au format PDF (96.2 kb)
|
1060 ES7
INJECTION & CASTING EPOXY SYSTEM FOR ELECTRICAL INSULATION
RESOLTECH 1060 ES7 is an epoxy system formulated to insulate electric and electronic connections.
The system provides excellent insulating properties and ease of use. It is nonflammable, does not shrink, cures without any evaporation, does not degrade electronic components and cures in an enclosed volume.
RESOLTECH 1060 ES7 is also available in a slower, non exothermic version called 1060E7.
Télécharger la fiche technique au format PDF (225.4 kb)
|
1070S
CLEAR EPOXY LAMINATING SYSTEM
RESOLTECH 1070S is a clear epoxy laminating system formulated to produce clear laminates, coats or fillers with good UV stability. RESOLTECH 1070S is easy to use, cures at ambient temperature and is self leveling.
Télécharger la fiche technique au format PDF (114.2 kb)
|
1080
EPOXY LAMINATING SYSTEM
RESOLTECH 1080 is a high performance structural laminating system that combines high thermal and mechanical performances with an ambient cure.
RESOLTECH 1080 is suitable for the manufacture of large composite parts, blades, hulls, moulds and injection.
Télécharger la fiche technique au format PDF (220 kb)
|
1090FR
Self-extinguishing epoxy system complying to FAR 25.853
HADES RESOLTECH 1090FR-109xHTD is a system of epoxy resin self-extinguishing approved by the eronautical standards making it possible to carry out structural composite parts with all the existing reinforcements.
Thanks to its low viscosity and its reactivity, it as well allows applications in stratifi cation by traditional wet process as in fi lament rolling up and hot forming. The hardeners 109xHTD of this system are proportioned with 11 shares for 100 resin shares in weight and give very good temperatures of vitreous transition (90°C).
Télécharger la fiche technique au format PDF (138.3 kb)
|
1800
Structural Epoxy system for infusion & injection
RESOLTECH 1800 is an advanced infusion and injection epoxy resin system with an extremely low viscosity for fast and safe wetout by infusion and injection.
It features high mechanical properties, and a constant low viscosity right until gel time. It therefore offers reliable impregnation and air release throughout the infusion or injection process. Suitable for very large composite parts. It is suitable for both tooling and parts manufacturing. Typical applications include large marine
structures, wind turbine blades, moulds for pre-preg production.
Télécharger la fiche technique au format PDF (382 kb)
|
2010 M25
FOAMING EPOXY SYSTEM
RESOLTECH 2010M25 is an epoxy foaming system formulated to fill voids and create a structural core. This enables manufacturers to produce complex shaped parts such as paddles, blades, rudders, fins. RESOLTECH 2010M25 produces a durable, homogeneus foam with low exothermy. RESOLTECH 2010M25 does not contains any CFC or banned chemical.
Télécharger la fiche technique au format PDF (225.7 kb)
|
2010FC
EPOXY SELF-LEVELLING DECK COATING
Self extinguishing, self leveling. Corrosion resistant. High adhesion to metals. Replaces cement based products.
Télécharger la fiche technique au format PDF (106.7 kb)
|
2010FGCS
Self-extinguishing epoxy gelcoat - conforming to marine, aeronautical and building construction regulations
RESOLTECH 2010FGCS-2014 FGC is a self-extinguishing epoxy that complies with the
OMI-SOLAS 2000 directive. Thanks to its viscosity, it is suitable for the application of both simple and complex forms. Once hardened, the parts can be released from the mould without post-curing. The optimal thermomechanical properties are obtained after an adapted cycle of curing. However, postcuring is NOT essential depending on the final use of the parts.
Télécharger la fiche technique au format PDF (981.9 kb)
|
2010HP
Low density Epoxy Casting System
A Low density casting epoxy system with low exothermic peak, ambient temperature curing between 15 minutes to 10 hours depending on hardner
Télécharger la fiche technique au format PDF (193.4 kb)
|
2040G
Structural Adhesive Epoxy for wood bonding & Structural Fillet Joints
Evolution of the RESOLTECH 2040 system, The RESOLTECH 2040G is a structural adhesive paste specifically formulated for fillet joints on wood. It can also commonly used as general purpose structural wood adhesive, specially on vertical or overhanging surfaces thanks to it cohesion and high adhesion properties.
Télécharger la fiche technique au format PDF (102.7 kb)
|
2050
EPOXY CASTING SYSTEM
RESOLTECH 2050 is a high performance epoxy casting system suitable for castings ranging from a few millimetres to several centimetres without shrinkage. The system provides high mechanical properties, is non flammable and allows for large castings to be made in a single operation. Several colours available.
Télécharger la fiche technique au format PDF (222.4 kb)
|
2060 ALU 25
EPOXY CASTING SYSTEM
RESOLCOAT 2060 is an epoxy casting system formulated to produce parts or moulds from a few milimetres to several centimeters thick. It is used to produce moulds and tooling plugs. RESOLCOAT 2060 combines ease of use, thermal and mechanical properties as well as virtually no shrinkage.
Télécharger la fiche technique au format PDF (218.5 kb)
|
2080M25
Structural Epoxy Foaming system
RESOLTECH 2080 M25 is a liquid foaming epoxy casting system formulated to produce low density, closed cell, strutural cores. The slow, controled foaming reaction negates the use of mixing machines normally associated with PU foams – The low pressure of the foaming system will enable direct casting within the final parts with no conforming moulds and without alteration to the dimensions of the final composite piece. This system is available in black, white or neutral colour (to be pigmented with any colour)
Télécharger la fiche technique au format PDF (180.8 kb)
|
2090 Deck Caulking
Epoxy System for Wood/Deck Caulking
The RESOLTECH 2090 is a casting epoxy system that hardens at ambient temperature and enables the realisation of superior wood deck caulking thanks to its high adhesion and mechanical resistance. The system has an excellent chemical resistance to UV exposure, detergents, solvents, petrol based products, acids or bases. It will not deteriorate under the use of deck cleaning products, avoiding to stain shoes or cloth.
Télécharger la fiche technique au format PDF (481.3 kb)
|
2200
EPOXY CASTING SYSTEM
RESOLTECH 2200 is an epoxy casting system formulated to be cast in thick films for CNC machining and milling. RESOLTECH 2200 is a mineral filled system available with different hardeners to adjust reactivity. It cures at ambient temperature. RESOLTECH 2200 can be used for toolmaking, foundry patterns, working models, duplicate milling models, jigs and fixtures.
Télécharger la fiche technique au format PDF (72.4 kb)
|
3000T
EPOXY COATING SYSTEM
Resoltech 3000T BLANC/3005T is an epoxy coating with high chemical
and thermal resistance available in all RAL colors.
Thanks to it’s high dry extract content formulation, it is recommended
as semi-gloss finish-coat.
It is easily applied either with brushes, rollers or sprayed on all kind of
supports: steel, concrete, composites (polyesters and epoxies) and
wood.
Télécharger la fiche technique au format PDF (22.6 kb)
|
3010P Yacht Filler
EPOXY PRIMER
RESOLCOAT 3010P is a 2 part epoxy primer providing high adhesion to steel and aluminium hulls as well as other boatbuilding materials. RESOLCOAT 3010P also acts as an anti-corrosion barrier. The system is easy to apply above and below the waterline by spray, roller or brush and is fast drying.
Télécharger la fiche technique au format PDF (35.9 kb)
|
3010T
EPOXY HIGH BUILD SURFACER
RESOLCOAT 3010T is a high build surfacer formulated to create a barrier against water and chemicals to protect a yacht hull as well as providing a perfect surface finish and interface for all marine topcoats. The system is easy to apply by spray, roller or brush and is fast drying. A suitable finish is obtained after at least two coats of this system. Suitable for steel, aluminium, GRP and wooden yachts.
Télécharger la fiche technique au format PDF (37.2 kb)
|
3020HP
EPOXY FILLER
RESOLCOAT 3020 HP is a lightweight epoxy filler formulated to fair and finish laminates and surfaces to a high standard. RESOLCOAT 3020 HP can be applied in thick layers, is easy to sand, water resistant and provides high resistance and durability. RESOLCOAT 3020 HP is suitable for both tooling and structural applications.
Télécharger la fiche technique au format PDF (217.6 kb)
|
3040
COLD CURE EPOXY ADHESIVE PASTE
RESOLTECH 3040 is a high performance adhesive formulated for ambient temperature bonding. It is suitable for composites, PVC & honeycomb cores, steel, aluminium alloys and even concrete. 3040 is non-flammable, easy to use, does not require post curing and can be used to bond materials with different dilatation properties.
Télécharger la fiche technique au format PDF (225.6 kb)
|
3050C
Structural Epoxy Adhesive
The Resoltech 3050C epoxy adhesive is a rubber toughened, high performance adhesive that will enable bondings with very high mechanical resistance (310 kg/cm2). It’s curing at ambient temperature and 1/1 mixing ratio in volume makes of the 3050C an easy product to work with. It will enables the bonding of materials of different dilatations coefficient and will resist in a large range of operating temperatures from -50°C to +80°C, with a maximum service temperature of 140°C. It is a solvent less adhesive with no contraction upon curing.
Télécharger la fiche technique au format PDF (68.8 kb)
|
3070
STRUCTURAL EPOXY ADHESIVE
RESOLTECH 3070 is a 2 parts epoxy adhesive system formulated for bonding various materials: most plastics, steel, aluminium, composites, GRP, wood and concrete. RESOLTECH 3070 cures quickly and provides high mechanical properties as well as being non flammable. The system also cures in poor environmental conditions.
Télécharger la fiche technique au format PDF (94.2 kb)
|
3500
Epoxy Adhesive for bonding materials with different dilatation coefficient ratios
The Resoltech 3500 epoxy adhesive cures at ambient temperature and enables the bonding of materials of different dilatations coefficient such as teak wood on composite, aluminium or steel hulls, steel on wood, etc.. It’s 40% elongation until break properties enable extremely strong and durable bonding with good chemical resistance.
Télécharger la fiche technique au format PDF (101.6 kb)
|
3500 HP
Low Density Epoxy Adhesive paste
The Resoltech 3500 HP epoxy adhesive paste enables durable lightweight bonding of materials of different dilatations coefficient such as PVC core materials on composites structures, wood on composites, aluminium or steel. GRP laminates (polyester on polyester, vinylester on vinylester) bonded with the 3500 HP system will suffer delaminations before adhesive failure.
Télécharger la fiche technique au format PDF (350.7 kb)
|
4020IN-4025IN
Self-levelling epoxy system
RESOLCOAT 4020 IN is a self levelling, thick, highly resistant epoxy coating system based on a 100% dry extract epoxy resin. It´s unique formula enables the realization of perfectly levelled floors—with a simple no-nonsense application method. Perfect surfaces will be obtained with 3 mm ( 5Kg/m²) to maximum 12 mm ( 20Kg/m²) .
Télécharger la fiche technique au format PDF (403.4 kb)
|
4020W
WATER BASED EPOXY FLOOR COATING
RESOLCOAT 4020W is a heavy duty floor coating available in a wide range of colours. It is self-leveling and easy to apply with a notched spreader. RESOLCOAT 4020W is a water based epoxy system. It is solvent free and not affected by residual moisture in the floor. Available with a non-slip additive (RESOLCOAT 4020W-GRIP).
Télécharger la fiche technique au format PDF (95.8 kb)
|
4070
ANTI-CORROSION EPOXY COATING
RESOLCOAT 4070 is an anti-corrosion epoxy coating formulated to provide maximum resistance to chemicals. It is designed to be used as a protective liner for tanks and machinery in contact with aggressive chemicals. The system has a long pot life, is non-flammable and provides a smooth, non-porous high gloss finish. Can be applied by spray, roller and brush. Suitable for tanks containing petrol, kerosene, diesel, oils, heavy oil, acids and food grade products.
Télécharger la fiche technique au format PDF (217 kb)
|
7060S
EPOXY GELCOAT SYSTEM
RESOLCOAT 7060S is an epoxy gelcoat available in a wide range of colours. It provides a good finish, UV stability, ambient temperature cure and high mechanical properties. It is solventless and can be applied by spraygun, roller or brush.
Télécharger la fiche technique au format PDF (211.4 kb)
|
7090
EPOXY GELCOAT150°C TG
RESOLCOAT 7090 is a high temperature resistant epoxy gelcoat, suitable for prepreg and other high temperature applications requiring a TG of 150°C. This system is solvent free and can be applied by spray or hand.
Télécharger la fiche technique au format PDF (217.7 kb)
|
8020 EX
SURFACE FINISHING EPOXY FILLER
RESOLTECH 8020EX is a high performance epoxy filler formulated for the surface finishing of composite structures. It is easy to apply with a squeegee, easy to sand after cure, tough and durable for life. 8020 is suitable for marine structures, lightweight composite boats, windmill blades edges and all surface finishing applications.
Télécharger la fiche technique au format PDF (217.5 kb)
|
9040PX
POLYESTER GELCOAT EPOXY COMPATIBLE
RESOLCOAT 9040PX is a polyester gelcoat available in a wide range of colours. Its special formulation allows for good adhesion properties with epoxy resin systems. RESOLCOAT 9040PX combines the advantages of the perfect surface finish of a polyester gelcoat with the superior mechanical performance of an epoxy laminate.
Télécharger la fiche technique au format PDF (221.6 kb)
|
ET245
CASTING POLYURETHANE SYSTEM DIELECTRIC & SELF EXTINGUISING
RESOLTHAN ET 245 is a 2 part polyurethane system formulated for dielectric casting for electrical and electronic applications. The system is self extinguishing to UL94 and available in a wide selection of colours. The system does not contain halogens and is non-magnetic. Excellent fire and heat behaviour. High heat conductivity
Télécharger la fiche technique au format PDF (221.7 kb)
|
ET286AN
EPOXY SYSTEM FOR DIELECTRICAL APPLICATIONS
RESOLTECH ET286 is an epoxy casting system formulated for dielectrical
applications, to encapsulate and insulate components in electrical and electronics applications. RESOLTECH ET286 is available in red, blue and other colours. The system is self extinguishing (M2F1 class) and complies with UL 94V0.
Télécharger la fiche technique au format PDF (222.5 kb)
|
HTG160
• High TG160°C • Low viscosity and high wetting out properties • High interlaminar & impact resistance properties
RESOLTECH HTG 160 / HTG 165 epoxy system is very high TG infusion resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 160°C.
This new generation system, optimized with low viscosity, high wetting roperties and excellent air release, is suitable for the manufacture of large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to
the users. The stable low viscosity vs temperature makes of the HTG 160 system a prime choice for infusion process.
Télécharger la fiche technique au format PDF (332.1 kb)
|
HTG180
High TG Structural Infusion Epoxy Systems • High TG 180°C • Low viscosity and high wetting out properties
RESOLTECH HTG 180 / HTG 185 epoxy system is very high TG infusion resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 180°C. This new generation system, optimized with low viscosity, high wetting properties and excellent air release, is suitable for the manufacture of large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users. This system guarantees high inter-laminar properties and impact resistance thanks to its exceptional wetting properties even on aramid reinforcements.
Télécharger la fiche technique au format PDF (284.5 kb)
|
HTG200
High TG Structural Infusion Epoxy Systems • High TG 200°C • Low viscosity and high wetting out properties
RESOLTECH HTG 200 / HTG 205 epoxy system is very high TG resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 200°C. Due to its low viscosity, high wetting properties and excellent air release, is suitable for the anufacture of structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users. The stable low viscosity vs temperature makes of the HTG 200 system a prime choice for infusion process. This system guarantees high inter-laminar properties and impact resistance thanks to its exceptional wetting properties even on aramid reinforcements.
Télécharger la fiche technique au format PDF (304.1 kb)
|
HTG240
High TG Structural Infusion Epoxy Systems
RESOLTECH HTG 240 / HTG 245 epoxy system is very high TG resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 240°C.
Due to its low viscosity, high wetting properties and excellent air release, is suitable for the manufacture of structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users.
Télécharger la fiche technique au format PDF (285 kb)
|
IFRIT PR01
IFRIT PR01 is a high performance fire & heat protection material. It behaves as an active insulating coating, reacting to heat by developing an endothermic reaction without releasing any pollutants. The system may be applied onto composite materials, metal and other surfaces using a notched spreader or sprayed with an airless.
Télécharger la fiche technique au format PDF (170.9 kb)
|
RE 3300
EPOXY ADHESIVE
RESOLTECH 3300 is a high chemical resistance epoxy adhesive that can be applied onto dry or damp surfaces but also underwater. RESOLTECH 3300 is used to seal, bond or repair a large selection of materials, including fiberglass,
aluminium, steel, concrete and ABS plastics.
Télécharger la fiche technique au format PDF (170.2 kb)
|
VI5010
RESOLCOAT VINYLESTER PRIMER
RESOLCOAT VI 5010 is a vinylester primer that combines very high chemical resistance with superior adhesion to supports such as steel, concrete and fiberglass. It is based on an accelerated epoxy resin. Its low viscosity and adjustable working time make it an ideal primer for anti corrosion applications. It improves the adhesion of vinylester coatings and can also be used to fill cracks and gaps.
Télécharger la fiche technique au format PDF (219.6 kb)
|
VI5030
VINYLESTER LAMINATING SYSTEM
RESOLTECH VI 5030 is a vinylester (modified epoxy) system formulated to produce high performance laminates with glass, aramid and carbon reinforcements. VI 5030 features a low viscosity, good thermal properties and high resistance to water and chemicals. VI 5030 is commonly used to laminate structural parts, mostly for tanks, shafts and components that will be in contact with chemicals.
Télécharger la fiche technique au format PDF (220.4 kb)
|
VI5080
RESOLCOAT VINYLESTER COATING
RESOLCOAT VI 5080 is a vinylester coating that combines very high chemical resistance with superior temperature resistance. VI 5080 was formulated for the protection of tanks, pipes and systems in contact with highly corrosive substances. It contains mica flakes. Its ease of use and durability make it an ideal coating for severe anti corrosion applications.
Télécharger la fiche technique au format PDF (218.6 kb)
|
VI5090
Vinylester Gelcoat Epoxy Compatible
The VI5090 is a high resistance Gelcoat formulated on a Vinylester resin base. Its main characteristics are a very high resistance to solvents and chemical agents, which makes it an excellent product for tooling, but also its high TG of 105 degrees makes it a product of choice for Pre-preg parts For tooling, the VI 5090 enables the mould to have a permanent high gloss aspect resisting to many cycles between waxing/polishing. Thanks to its low dilatation module when exposed to temperature and its flexibility, the VI5090 is not prone to cracks and the appearance of mat zones. The VI 5090 comes in a Neutral (transparent) Color but can be delivered in any RAL color or with RAL pigments
Télécharger la fiche technique au format PDF (61.5 kb)
|
VLSUV
EPOXY VARNISH-LACQUER CLEAR & FLEXIBLE
RESOLCOAT VLS UV is a clear and UV stable epoxy varnish formulated to produce high gloss thick coatings to enhance wood or other supports. It is waterproof, easy to apply in films 1mm to 4mm thick. It combines low toxicity, high mechanical and abrasion resistance.
Télécharger la fiche technique au format PDF (213.8 kb)
|
WWA
CLEAR EPOXY CASTING SYSTEM
Resoltech WWA is a unique epoxy system formulated for decorative applications and castings. It is totally clear, UV stabilized, not solvented and compatible with glass. Excellent optical properties. No shrinkage.
Télécharger la fiche technique au format PDF (268 kb)
|
|
