.
1040
high performance epoxy laminating system
Advanced epoxy laminating system formulated to manufacture high performance structures
with or without post-curing. The system is suitable for the manufacture of large
structures and composite parts by contact, infusion and injection moulding. It features
an adjustable working time from 15mn to 8 hours, a max. Tg of 144°C, optimised
viscosity and low toxicity to the user. It is possible to release the parts from the mould
without post-curing (except with the HT & SL hardeners). The resulting structures will
have an excellent resistance to high temperature. The system is also suitable for casting
and filament winding applications.
 Download Data Sheet in PDF format (100.3 kb) 
|
1040 - (1405)
Infusion Epoxy Resin system
RESOLTECH 1040 - 1405 is an epoxy resin system formulated for infusion applications. It enables to manufacture structural composites parts with all existing reinforcement fabrics.
Thanks to its low viscosity and high wetting properties, it can be used by hand lay-up or via infusion, vaccum bagging and RTM. Once reticulated at ambient temperature, the parts should be post-cured according to the thermal cycle indicated in this datasheet in order to obtain the maximum mechanical properties of this resin system. It’s TG of 150°C enables the realisation of high quality and performance parts as well as tooling for prepreg parts.
Download Data Sheet in PDF format (106.7 kb)
|
1050
HIGH PERFORMANCE EPOXY LAMINATING SYSTEM
Advanced epoxy laminating system formulated to manufacture high performance structures with or without post-curing. The system is suitable for the manufacture of large structures and composite parts by contact, infusion and injection moulding. It features an adjustable working time from 15mn to 10 hours, a max. Tg of 75°C, optimised viscosity and low toxicity to the user. It is possible to release the parts from the mould without post-curing. The resulting structures will have very good mechanical properties. The system is also suitable for casting and filament winding applications.
Download Data Sheet in PDF format (288.5 kb)
|
1080
EPOXY LAMINATING SYSTEM
RESOLTECH 1080 is a high performance structural laminating system that combines high thermal and mechanical performances with an ambient cure.
RESOLTECH 1080 is suitable for the manufacture of large composite parts, blades, hulls, moulds and injection.
Download Data Sheet in PDF format (220 kb)
|
2040G
Structural Adhesive Epoxy for wood bonding & Structural Fillet Joints
Evolution of the RESOLTECH 2040 system, The RESOLTECH 2040G is a structural adhesive paste specifically formulated for fillet joints on wood. It can also commonly used as general purpose structural wood adhesive, specially on vertical or overhanging surfaces thanks to it cohesion and high adhesion properties.
Download Data Sheet in PDF format (102.7 kb)
|
2050
EPOXY CASTING SYSTEM
RESOLTECH 2050 is a high performance epoxy casting system suitable for castings ranging from a few millimetres to several centimetres without shrinkage. The system provides high mechanical properties, is non flammable and allows for large castings to be made in a single operation. Several colours available.
Download Data Sheet in PDF format (222.4 kb)
|
2060 ALU 25
EPOXY CASTING SYSTEM
RESOLCOAT 2060 is an epoxy casting system formulated to produce parts or moulds from a few milimetres to several centimeters thick. It is used to produce moulds and tooling plugs. RESOLCOAT 2060 combines ease of use, thermal and mechanical properties as well as virtually no shrinkage.
Download Data Sheet in PDF format (218.5 kb)
|
2200
EPOXY CASTING SYSTEM
RESOLTECH 2200 is an epoxy casting system formulated to be cast in thick films for CNC machining and milling. RESOLTECH 2200 is a mineral filled system available with different hardeners to adjust reactivity. It cures at ambient temperature. RESOLTECH 2200 can be used for toolmaking, foundry patterns, working models, duplicate milling models, jigs and fixtures.
Download Data Sheet in PDF format (72.4 kb)
|
3000T
EPOXY COATING SYSTEM
Resoltech 3000T BLANC/3005T is an epoxy coating with high chemical
and thermal resistance available in all RAL colors.
Thanks to it’s high dry extract content formulation, it is recommended
as semi-gloss finish-coat.
It is easily applied either with brushes, rollers or sprayed on all kind of
supports: steel, concrete, composites (polyesters and epoxies) and
wood.
Download Data Sheet in PDF format (22.6 kb)
|
3010T
EPOXY HIGH BUILD SURFACER
RESOLCOAT 3010T is a high build surfacer formulated to create a barrier against water and chemicals to protect a yacht hull as well as providing a perfect surface finish and interface for all marine topcoats. The system is easy to apply by spray, roller or brush and is fast drying. A suitable finish is obtained after at least two coats of this system. Suitable for steel, aluminium, GRP and wooden yachts.
Download Data Sheet in PDF format (37.2 kb)
|
3020HP
EPOXY FILLER
RESOLCOAT 3020 HP is a lightweight epoxy filler formulated to fair and finish laminates and surfaces to a high standard. RESOLCOAT 3020 HP can be applied in thick layers, is easy to sand, water resistant and provides high resistance and durability. RESOLCOAT 3020 HP is suitable for both tooling and structural applications.
Download Data Sheet in PDF format (217.6 kb)
|
7090
EPOXY GELCOAT150°C TG
RESOLCOAT 7090 is a high temperature resistant epoxy gelcoat, suitable for prepreg and other high temperature applications requiring a TG of 150°C. This system is solvent free and can be applied by spray or hand.
Download Data Sheet in PDF format (217.7 kb)
|
8020 EX
SURFACE FINISHING EPOXY FILLER
RESOLTECH 8020EX is a high performance epoxy filler formulated for the surface finishing of composite structures. It is easy to apply with a squeegee, easy to sand after cure, tough and durable for life. 8020 is suitable for marine structures, lightweight composite boats, windmill blades edges and all surface finishing applications.
Download Data Sheet in PDF format (217.5 kb)
|
HTG160
• High TG160°C • Low viscosity and high wetting out properties • High interlaminar & impact resistance properties
RESOLTECH HTG 160 / HTG 165 epoxy system is very high TG infusion resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 160°C.
This new generation system, optimized with low viscosity, high wetting roperties and excellent air release, is suitable for the manufacture of large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to
the users. The stable low viscosity vs temperature makes of the HTG 160 system a prime choice for infusion process.
Download Data Sheet in PDF format (332.1 kb)
|
HTG180
High TG Structural Infusion Epoxy Systems • High TG 180°C • Low viscosity and high wetting out properties
RESOLTECH HTG 180 / HTG 185 epoxy system is very high TG infusion resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 180°C. This new generation system, optimized with low viscosity, high wetting properties and excellent air release, is suitable for the manufacture of large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users. This system guarantees high inter-laminar properties and impact resistance thanks to its exceptional wetting properties even on aramid reinforcements.
Download Data Sheet in PDF format (284.5 kb)
|
HTG200
High TG Structural Infusion Epoxy Systems • High TG 200°C • Low viscosity and high wetting out properties
RESOLTECH HTG 200 / HTG 205 epoxy system is very high TG resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 200°C. Due to its low viscosity, high wetting properties and excellent air release, is suitable for the anufacture of structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users. The stable low viscosity vs temperature makes of the HTG 200 system a prime choice for infusion process. This system guarantees high inter-laminar properties and impact resistance thanks to its exceptional wetting properties even on aramid reinforcements.
Download Data Sheet in PDF format (304.1 kb)
|
HTG240
High TG Structural Infusion Epoxy Systems
RESOLTECH HTG 240 / HTG 245 epoxy system is very high TG resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 240°C.
Due to its low viscosity, high wetting properties and excellent air release, is suitable for the manufacture of structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users.
Download Data Sheet in PDF format (285 kb)
|
VI5090
Vinylester Gelcoat Epoxy Compatible
The VI5090 is a high resistance Gelcoat formulated on a Vinylester resin base. Its main characteristics are a very high resistance to solvents and chemical agents, which makes it an excellent product for tooling, but also its high TG of 105 degrees makes it a product of choice for Pre-preg parts For tooling, the VI 5090 enables the mould to have a permanent high gloss aspect resisting to many cycles between waxing/polishing. Thanks to its low dilatation module when exposed to temperature and its flexibility, the VI5090 is not prone to cracks and the appearance of mat zones. The VI 5090 comes in a Neutral (transparent) Color but can be delivered in any RAL color or with RAL pigments
Download Data Sheet in PDF format (61.5 kb)
|
|
