.
1020
Structural epoxy resin system for wood
RESOLTECH 1020 is a advanced epoxy laminating system for wood-epoxy constructions. It may be used for: all woods laminations, coating, scarfing, strip planking, as well as bonding in form of fillet joints applications when filled with wood flour and silica.
Thanks to its low viscosity and a wide range of hardeners (15 min to 10hours), it allows applications in both traditional wet layup, vacuum bagging or under press. A thixotropic version , the 1020T is available for vertical or overhanging applications prone to dripping.
 Download Data Sheet in PDF format (318.7 kb) 
|
1020T
THIXOTROPIC WOOD EPOXY SYSTEM
RESOLTECH 1020T is a pregel wood adhesive system optimised for the manufacture of laminated wood parts and structures. It provides ease of use, low toxicity to the user, good impregnation of the timber surface, high mechanical performance of the cured structure and an adjustable working time. 1020T makes bonds that are stronger than the timber itself, enhancing its mechanical properties and producing long lasting heavy duty structures for marine, building and engineering applications.
Download Data Sheet in PDF format (103.1 kb)
|
1030H
Wood-Epoxy Construction
RESOLCOAT 1030H is a high performance clear varnish formulated for
wood coating applications. It will produce a tough, high gloss & UV
stable coating enhancing the finish of the wood.
The system can also be used to laminate clear glass over wood.
Download Data Sheet in PDF format (204.9 kb)
|
1070S
CLEAR EPOXY LAMINATING SYSTEM
RESOLTECH 1070S is a clear epoxy laminating system formulated to produce clear laminates, coats or fillers with good UV stability. RESOLTECH 1070S is easy to use, cures at ambient temperature and is self leveling.
Download Data Sheet in PDF format (114.2 kb)
|
2010FC
EPOXY SELF-LEVELLING DECK COATING
Self extinguishing, self leveling. Corrosion resistant. High adhesion to metals. Replaces cement based products.
Download Data Sheet in PDF format (106.7 kb)
|
2010FGCS
Self-extinguishing epoxy gelcoat - conforming to marine, aeronautical and building construction regulations
RESOLTECH 2010FGCS-2014 FGC is a self-extinguishing epoxy that complies with the
OMI-SOLAS 2000 directive. Thanks to its viscosity, it is suitable for the application of both simple and complex forms. Once hardened, the parts can be released from the mould without post-curing. The optimal thermomechanical properties are obtained after an adapted cycle of curing. However, postcuring is NOT essential depending on the final use of the parts.
Download Data Sheet in PDF format (981.9 kb)
|
2010HP
Low density Epoxy Casting System
A Low density casting epoxy system with low exothermic peak, ambient temperature curing between 15 minutes to 10 hours depending on hardner
Download Data Sheet in PDF format (193.4 kb)
|
2010HP
Résine époxy basse densité de coulée.
Elle vous permettra de réaliser tous types de pièces et des calages performants même de grande dimension. Grâce à sa basse viscosité et à sa faible réactivité elle permet des moulages aussi bien par gravitation que sous vide ou par injection, avec toutes les charges existantes
Download Data Sheet in PDF format (109.6 ko)
|
2040G
Structural Adhesive Epoxy for wood bonding & Structural Fillet Joints
Evolution of the RESOLTECH 2040 system, The RESOLTECH 2040G is a structural adhesive paste specifically formulated for fillet joints on wood. It can also commonly used as general purpose structural wood adhesive, specially on vertical or overhanging surfaces thanks to it cohesion and high adhesion properties.
Download Data Sheet in PDF format (102.7 kb)
|
2050
EPOXY CASTING SYSTEM
RESOLTECH 2050 is a high performance epoxy casting system suitable for castings ranging from a few millimetres to several centimetres without shrinkage. The system provides high mechanical properties, is non flammable and allows for large castings to be made in a single operation. Several colours available.
Download Data Sheet in PDF format (222.4 kb)
|
3000T
EPOXY COATING SYSTEM
Resoltech 3000T BLANC/3005T is an epoxy coating with high chemical
and thermal resistance available in all RAL colors.
Thanks to it’s high dry extract content formulation, it is recommended
as semi-gloss finish-coat.
It is easily applied either with brushes, rollers or sprayed on all kind of
supports: steel, concrete, composites (polyesters and epoxies) and
wood.
Download Data Sheet in PDF format (22.6 kb)
|
3010P Yacht Filler
EPOXY PRIMER
RESOLCOAT 3010P is a 2 part epoxy primer providing high adhesion to steel and aluminium hulls as well as other boatbuilding materials. RESOLCOAT 3010P also acts as an anti-corrosion barrier. The system is easy to apply above and below the waterline by spray, roller or brush and is fast drying.
Download Data Sheet in PDF format (35.9 kb)
|
3010T
EPOXY HIGH BUILD SURFACER
RESOLCOAT 3010T is a high build surfacer formulated to create a barrier against water and chemicals to protect a yacht hull as well as providing a perfect surface finish and interface for all marine topcoats. The system is easy to apply by spray, roller or brush and is fast drying. A suitable finish is obtained after at least two coats of this system. Suitable for steel, aluminium, GRP and wooden yachts.
Download Data Sheet in PDF format (37.2 kb)
|
3500
Epoxy Adhesive for bonding materials with different dilatation coefficient ratios
The Resoltech 3500 epoxy adhesive cures at ambient temperature and enables the bonding of materials of different dilatations coefficient such as teak wood on composite, aluminium or steel hulls, steel on wood, etc.. It’s 40% elongation until break properties enable extremely strong and durable bonding with good chemical resistance.
Download Data Sheet in PDF format (101.6 kb)
|
3500 HP
Low Density Epoxy Adhesive paste
The Resoltech 3500 HP epoxy adhesive paste enables durable lightweight bonding of materials of different dilatations coefficient such as PVC core materials on composites structures, wood on composites, aluminium or steel. GRP laminates (polyester on polyester, vinylester on vinylester) bonded with the 3500 HP system will suffer delaminations before adhesive failure.
Download Data Sheet in PDF format (350.7 kb)
|
4020IN-4025IN
Self-levelling epoxy system
RESOLCOAT 4020 IN is a self levelling, thick, highly resistant epoxy coating system based on a 100% dry extract epoxy resin. It´s unique formula enables the realization of perfectly levelled floors—with a simple no-nonsense application method. Perfect surfaces will be obtained with 3 mm ( 5Kg/m²) to maximum 12 mm ( 20Kg/m²) .
Download Data Sheet in PDF format (403.4 kb)
|
4020W
WATER BASED EPOXY FLOOR COATING
RESOLCOAT 4020W is a heavy duty floor coating available in a wide range of colours. It is self-leveling and easy to apply with a notched spreader. RESOLCOAT 4020W is a water based epoxy system. It is solvent free and not affected by residual moisture in the floor. Available with a non-slip additive (RESOLCOAT 4020W-GRIP).
Download Data Sheet in PDF format (95.8 kb)
|
IFRIT PR01
IFRIT PR01 is a high performance fire & heat protection material. It behaves as an active insulating coating, reacting to heat by developing an endothermic reaction without releasing any pollutants. The system may be applied onto composite materials, metal and other surfaces using a notched spreader or sprayed with an airless.
Download Data Sheet in PDF format (170.9 kb)
|
|
