.
1010
A unique water based epoxy system.
RESOLCOAT 1010 is a unique water based epoxy system. It may be used in a very large number of applications such as primer, varnish, veneer adhesive but also as matrix for self levelling compounds or mortars. Domains of application range from marine construction, furniture manufacturing, industrial & residential construction and fine arts.
Apart from hydrophobic subtracts, the 1010 system is compatible with most supports such as wood, concrete, plaster, stone, ceramic, metal..etc. It can be highly diluted in water so its viscosity can result extremely low, resulting in a prime choice material for priming. It is used as wood primer on new woods & timbers but also as hardening material when applied of injected in old woods for conservation or purposes. Less diluted, it becomes a transparent varnish highly resistant to abrasion. It will enhance the colour of woods and other materials such as ceramics or carbon fibre.
Applied in maximum 2 thin layers, it’s micro-porosity to vapour will enable the 1010 to be used as a water barrier for materials that need to breath (wood, concrete).
 Download Data Sheet in PDF format (480.7 kb) 
|
1020
Structural epoxy resin system for wood
RESOLTECH 1020 is a advanced epoxy laminating system for wood-epoxy constructions. It may be used for: all woods laminations, coating, scarfing, strip planking, as well as bonding in form of fillet joints applications when filled with wood flour and silica.
Thanks to its low viscosity and a wide range of hardeners (15 min to 10hours), it allows applications in both traditional wet layup, vacuum bagging or under press. A thixotropic version , the 1020T is available for vertical or overhanging applications prone to dripping.
Download Data Sheet in PDF format (318.7 kb)
|
1020T
THIXOTROPIC WOOD EPOXY SYSTEM
RESOLTECH 1020T is a pregel wood adhesive system optimised for the manufacture of laminated wood parts and structures. It provides ease of use, low toxicity to the user, good impregnation of the timber surface, high mechanical performance of the cured structure and an adjustable working time. 1020T makes bonds that are stronger than the timber itself, enhancing its mechanical properties and producing long lasting heavy duty structures for marine, building and engineering applications.
Download Data Sheet in PDF format (103.1 kb)
|
1030H
Wood-Epoxy Construction
RESOLCOAT 1030H is a high performance clear varnish formulated for
wood coating applications. It will produce a tough, high gloss & UV
stable coating enhancing the finish of the wood.
The system can also be used to laminate clear glass over wood.
Download Data Sheet in PDF format (204.9 kb)
|
1070S
CLEAR EPOXY LAMINATING SYSTEM
RESOLTECH 1070S is a clear epoxy laminating system formulated to produce clear laminates, coats or fillers with good UV stability. RESOLTECH 1070S is easy to use, cures at ambient temperature and is self leveling.
Download Data Sheet in PDF format (114.2 kb)
|
2010FC
EPOXY SELF-LEVELLING DECK COATING
Self extinguishing, self leveling. Corrosion resistant. High adhesion to metals. Replaces cement based products.
Download Data Sheet in PDF format (106.7 kb)
|
2010FGCS
Self-extinguishing epoxy gelcoat - conforming to marine, aeronautical and building construction regulations
RESOLTECH 2010FGCS-2014 FGC is a self-extinguishing epoxy that complies with the
OMI-SOLAS 2000 directive. Thanks to its viscosity, it is suitable for the application of both simple and complex forms. Once hardened, the parts can be released from the mould without post-curing. The optimal thermomechanical properties are obtained after an adapted cycle of curing. However, postcuring is NOT essential depending on the final use of the parts.
Download Data Sheet in PDF format (981.9 kb)
|
2010HP
Low density Epoxy Casting System
A Low density casting epoxy system with low exothermic peak, ambient temperature curing between 15 minutes to 10 hours depending on hardner
Download Data Sheet in PDF format (193.4 kb)
|
2040G
Structural Adhesive Epoxy for wood bonding & Structural Fillet Joints
Evolution of the RESOLTECH 2040 system, The RESOLTECH 2040G is a structural adhesive paste specifically formulated for fillet joints on wood. It can also commonly used as general purpose structural wood adhesive, specially on vertical or overhanging surfaces thanks to it cohesion and high adhesion properties.
Download Data Sheet in PDF format (102.7 kb)
|
2050
EPOXY CASTING SYSTEM
RESOLTECH 2050 is a high performance epoxy casting system suitable for castings ranging from a few millimetres to several centimetres without shrinkage. The system provides high mechanical properties, is non flammable and allows for large castings to be made in a single operation. Several colours available.
Download Data Sheet in PDF format (222.4 kb)
|
3500
Epoxy Adhesive for bonding materials with different dilatation coefficient ratios
The Resoltech 3500 epoxy adhesive cures at ambient temperature and enables the bonding of materials of different dilatations coefficient such as teak wood on composite, aluminium or steel hulls, steel on wood, etc.. It’s 40% elongation until break properties enable extremely strong and durable bonding with good chemical resistance.
Download Data Sheet in PDF format (101.6 kb)
|
3500 HP
Low Density Epoxy Adhesive paste
The Resoltech 3500 HP epoxy adhesive paste enables durable lightweight bonding of materials of different dilatations coefficient such as PVC core materials on composites structures, wood on composites, aluminium or steel. GRP laminates (polyester on polyester, vinylester on vinylester) bonded with the 3500 HP system will suffer delaminations before adhesive failure.
Download Data Sheet in PDF format (350.7 kb)
|
4020IN-4025IN
Self-levelling epoxy system
RESOLCOAT 4020 IN is a self levelling, thick, highly resistant epoxy coating system based on a 100% dry extract epoxy resin. Itīs unique formula enables the realization of perfectly levelled floors—with a simple no-nonsense application method. Perfect surfaces will be obtained with 3 mm ( 5Kg/mē) to maximum 12 mm ( 20Kg/mē) .
Download Data Sheet in PDF format (403.4 kb)
|
7060S
EPOXY GELCOAT SYSTEM
RESOLCOAT 7060S is an epoxy gelcoat available in a wide range of colours. It provides a good finish, UV stability, ambient temperature cure and high mechanical properties. It is solventless and can be applied by spraygun, roller or brush.
Download Data Sheet in PDF format (211.4 kb)
|
9040PX
POLYESTER GELCOAT EPOXY COMPATIBLE
RESOLCOAT 9040PX is a polyester gelcoat available in a wide range of colours. Its special formulation allows for good adhesion properties with epoxy resin systems. RESOLCOAT 9040PX combines the advantages of the perfect surface finish of a polyester gelcoat with the superior mechanical performance of an epoxy laminate.
Download Data Sheet in PDF format (221.6 kb)
|
VLSUV
EPOXY VARNISH-LACQUER CLEAR & FLEXIBLE
RESOLCOAT VLS UV is a clear and UV stable epoxy varnish formulated to produce high gloss thick coatings to enhance wood or other supports. It is waterproof, easy to apply in films 1mm to 4mm thick. It combines low toxicity, high mechanical and abrasion resistance.
Download Data Sheet in PDF format (213.8 kb)
|
WWA
CLEAR EPOXY CASTING SYSTEM
Resoltech WWA is a unique epoxy system formulated for decorative applications and castings. It is totally clear, UV stabilized, not solvented and compatible with glass. Excellent optical properties. No shrinkage.
Download Data Sheet in PDF format (268 kb)
|
|
