.
1040
high performance epoxy laminating system
Advanced epoxy laminating system formulated to manufacture high performance structures
with or without post-curing. The system is suitable for the manufacture of large
structures and composite parts by contact, infusion and injection moulding. It features
an adjustable working time from 15mn to 8 hours, a max. Tg of 144°C, optimised
viscosity and low toxicity to the user. It is possible to release the parts from the mould
without post-curing (except with the HT & SL hardeners). The resulting structures will
have an excellent resistance to high temperature. The system is also suitable for casting
and filament winding applications.
 Download Data Sheet in PDF format (100.3 kb) 
|
1040 - (1045N 1048N)
High Performance Epoxy Laminating System
Advanced epoxy laminating system formulated to manufacture high performance lightweight structures with glass, carbon, aramid and basalt fibers with or without post-curing. This new generation system, optimised with a low reactivity, low viscosity and excellent air release properties, is suitable for the manufacture of large structures and composite parts by contact, infusion and injection moulding while guaranteeing low toxicity working conditions to the user. It features an adjustable working time from 20mn to 3 hours and 20 minutes with two hardeners that can be pre-blended together to precisely adjust the pot life thanks to their identical mixing ratio of 100:30 and perfect compatibility. It is possible to release the parts from the mould without post-curing.
Download Data Sheet in PDF format (204.7 kb)
|
1040 - (1405)
Infusion Epoxy Resin system
RESOLTECH 1040 - 1405 is an epoxy resin system formulated for infusion applications. It enables to manufacture structural composites parts with all existing reinforcement fabrics.
Thanks to its low viscosity and high wetting properties, it can be used by hand lay-up or via infusion, vaccum bagging and RTM. Once reticulated at ambient temperature, the parts should be post-cured according to the thermal cycle indicated in this datasheet in order to obtain the maximum mechanical properties of this resin system. It’s TG of 150°C enables the realisation of high quality and performance parts as well as tooling for prepreg parts.
Download Data Sheet in PDF format (106.7 kb)
|
1050
HIGH PERFORMANCE EPOXY LAMINATING SYSTEM
Advanced epoxy laminating system formulated to manufacture high performance structures with or without post-curing. The system is suitable for the manufacture of large structures and composite parts by contact, infusion and injection moulding. It features an adjustable working time from 15mn to 10 hours, a max. Tg of 75°C, optimised viscosity and low toxicity to the user. It is possible to release the parts from the mould without post-curing. The resulting structures will have very good mechanical properties. The system is also suitable for casting and filament winding applications.
Download Data Sheet in PDF format (288.5 kb)
|
1050MX2
FOAMING EPOXY SYSTEM
RESOLTECH 1050 MX2 is an epoxy foaming system formulated to laminates over rough foam surfaces and fill small gaps. It can be used by casting, injection, projection and laminating.
RESOLTECH 1050 MX2 combines ambient temperature use and cure, low exothermy, variable working time, low viscosity and high mechanical performance. RESOLTECH 1050 M is suitable for the manufacture of complex shaped laminates such as rudders, fins, paddles. RESOLTECH 1050 M does not contains any CFC or banned chemical.
Download Data Sheet in PDF format (96.2 kb)
|
1080
EPOXY LAMINATING SYSTEM
RESOLTECH 1080 is a high performance structural laminating system that combines high thermal and mechanical performances with an ambient cure.
RESOLTECH 1080 is suitable for the manufacture of large composite parts, blades, hulls, moulds and injection.
Download Data Sheet in PDF format (220 kb)
|
1090FR
Self-extinguishing epoxy system complying to FAR 25.853
HADES RESOLTECH 1090FR-109xHTD is a system of epoxy resin self-extinguishing approved by the eronautical standards making it possible to carry out structural composite parts with all the existing reinforcements.
Thanks to its low viscosity and its reactivity, it as well allows applications in stratifi cation by traditional wet process as in fi lament rolling up and hot forming. The hardeners 109xHTD of this system are proportioned with 11 shares for 100 resin shares in weight and give very good temperatures of vitreous transition (90°C).
Download Data Sheet in PDF format (138.3 kb)
|
1800
Structural Epoxy system for infusion & injection
RESOLTECH 1800 is an advanced infusion and injection epoxy resin system with an extremely low viscosity for fast and safe wetout by infusion and injection.
It features high mechanical properties, and a constant low viscosity right until gel time. It therefore offers reliable impregnation and air release throughout the infusion or injection process. Suitable for very large composite parts. It is suitable for both tooling and parts manufacturing. Typical applications include large marine
structures, wind turbine blades, moulds for pre-preg production.
Download Data Sheet in PDF format (382 kb)
|
2010HP
Low density Epoxy Casting System
A Low density casting epoxy system with low exothermic peak, ambient temperature curing between 15 minutes to 10 hours depending on hardner
Download Data Sheet in PDF format (193.4 kb)
|
2060 ALU 25
EPOXY CASTING SYSTEM
RESOLCOAT 2060 is an epoxy casting system formulated to produce parts or moulds from a few milimetres to several centimeters thick. It is used to produce moulds and tooling plugs. RESOLCOAT 2060 combines ease of use, thermal and mechanical properties as well as virtually no shrinkage.
Download Data Sheet in PDF format (218.5 kb)
|
3000T
EPOXY COATING SYSTEM
Resoltech 3000T BLANC/3005T is an epoxy coating with high chemical
and thermal resistance available in all RAL colors.
Thanks to it’s high dry extract content formulation, it is recommended
as semi-gloss finish-coat.
It is easily applied either with brushes, rollers or sprayed on all kind of
supports: steel, concrete, composites (polyesters and epoxies) and
wood.
Download Data Sheet in PDF format (22.6 kb)
|
3010T
EPOXY HIGH BUILD SURFACER
RESOLCOAT 3010T is a high build surfacer formulated to create a barrier against water and chemicals to protect a yacht hull as well as providing a perfect surface finish and interface for all marine topcoats. The system is easy to apply by spray, roller or brush and is fast drying. A suitable finish is obtained after at least two coats of this system. Suitable for steel, aluminium, GRP and wooden yachts.
Download Data Sheet in PDF format (37.2 kb)
|
3040
COLD CURE EPOXY ADHESIVE PASTE
RESOLTECH 3040 is a high performance adhesive formulated for ambient temperature bonding. It is suitable for composites, PVC & honeycomb cores, steel, aluminium alloys and even concrete. 3040 is non-flammable, easy to use, does not require post curing and can be used to bond materials with different dilatation properties.
Download Data Sheet in PDF format (225.6 kb)
|
3050C
Structural Epoxy Adhesive
The Resoltech 3050C epoxy adhesive is a rubber toughened, high performance adhesive that will enable bondings with very high mechanical resistance (310 kg/cm2). It’s curing at ambient temperature and 1/1 mixing ratio in volume makes of the 3050C an easy product to work with. It will enables the bonding of materials of different dilatations coefficient and will resist in a large range of operating temperatures from -50°C to +80°C, with a maximum service temperature of 140°C. It is a solvent less adhesive with no contraction upon curing.
Download Data Sheet in PDF format (68.8 kb)
|
3070
STRUCTURAL EPOXY ADHESIVE
RESOLTECH 3070 is a 2 parts epoxy adhesive system formulated for bonding various materials: most plastics, steel, aluminium, composites, GRP, wood and concrete. RESOLTECH 3070 cures quickly and provides high mechanical properties as well as being non flammable. The system also cures in poor environmental conditions.
Download Data Sheet in PDF format (94.2 kb)
|
7090
EPOXY GELCOAT150°C TG
RESOLCOAT 7090 is a high temperature resistant epoxy gelcoat, suitable for prepreg and other high temperature applications requiring a TG of 150°C. This system is solvent free and can be applied by spray or hand.
Download Data Sheet in PDF format (217.7 kb)
|
8020 EX
SURFACE FINISHING EPOXY FILLER
RESOLTECH 8020EX is a high performance epoxy filler formulated for the surface finishing of composite structures. It is easy to apply with a squeegee, easy to sand after cure, tough and durable for life. 8020 is suitable for marine structures, lightweight composite boats, windmill blades edges and all surface finishing applications.
Download Data Sheet in PDF format (217.5 kb)
|
9040PX
POLYESTER GELCOAT EPOXY COMPATIBLE
RESOLCOAT 9040PX is a polyester gelcoat available in a wide range of colours. Its special formulation allows for good adhesion properties with epoxy resin systems. RESOLCOAT 9040PX combines the advantages of the perfect surface finish of a polyester gelcoat with the superior mechanical performance of an epoxy laminate.
Download Data Sheet in PDF format (221.6 kb)
|
HTG160
• High TG160°C • Low viscosity and high wetting out properties • High interlaminar & impact resistance properties
RESOLTECH HTG 160 / HTG 165 epoxy system is very high TG infusion resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 160°C.
This new generation system, optimized with low viscosity, high wetting roperties and excellent air release, is suitable for the manufacture of large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to
the users. The stable low viscosity vs temperature makes of the HTG 160 system a prime choice for infusion process.
Download Data Sheet in PDF format (332.1 kb)
|
HTG180
High TG Structural Infusion Epoxy Systems • High TG 180°C • Low viscosity and high wetting out properties
RESOLTECH HTG 180 / HTG 185 epoxy system is very high TG infusion resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 180°C. This new generation system, optimized with low viscosity, high wetting properties and excellent air release, is suitable for the manufacture of large structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users. This system guarantees high inter-laminar properties and impact resistance thanks to its exceptional wetting properties even on aramid reinforcements.
Download Data Sheet in PDF format (284.5 kb)
|
HTG200
High TG Structural Infusion Epoxy Systems • High TG 200°C • Low viscosity and high wetting out properties
RESOLTECH HTG 200 / HTG 205 epoxy system is very high TG resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 200°C. Due to its low viscosity, high wetting properties and excellent air release, is suitable for the anufacture of structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users. The stable low viscosity vs temperature makes of the HTG 200 system a prime choice for infusion process. This system guarantees high inter-laminar properties and impact resistance thanks to its exceptional wetting properties even on aramid reinforcements.
Download Data Sheet in PDF format (304.1 kb)
|
HTG240
High TG Structural Infusion Epoxy Systems
RESOLTECH HTG 240 / HTG 245 epoxy system is very high TG resin specially formulated for the production of tooling and large structural composites parts requiring TG’s and service temperatures up to 240°C.
Due to its low viscosity, high wetting properties and excellent air release, is suitable for the manufacture of structures and composite parts by wet lay-up, infusion, injection moulding or filament winding while guaranteeing low toxicity working conditions to the users.
Download Data Sheet in PDF format (285 kb)
|
RE 3300
EPOXY ADHESIVE
RESOLTECH 3300 is a high chemical resistance epoxy adhesive that can be applied onto dry or damp surfaces but also underwater. RESOLTECH 3300 is used to seal, bond or repair a large selection of materials, including fiberglass,
aluminium, steel, concrete and ABS plastics.
Download Data Sheet in PDF format (170.2 kb)
|
VI5090
Vinylester Gelcoat Epoxy Compatible
The VI5090 is a high resistance Gelcoat formulated on a Vinylester resin base. Its main characteristics are a very high resistance to solvents and chemical agents, which makes it an excellent product for tooling, but also its high TG of 105 degrees makes it a product of choice for Pre-preg parts For tooling, the VI 5090 enables the mould to have a permanent high gloss aspect resisting to many cycles between waxing/polishing. Thanks to its low dilatation module when exposed to temperature and its flexibility, the VI5090 is not prone to cracks and the appearance of mat zones. The VI 5090 comes in a Neutral (transparent) Color but can be delivered in any RAL color or with RAL pigments
Download Data Sheet in PDF format (61.5 kb)
|
|
