|
 |
.
1010
A unique water based epoxy system.
RESOLCOAT 1010 is a unique water based epoxy system. It may be used in a very large number of applications such as primer, varnish, veneer adhesive but also as matrix for self levelling compounds or mortars. Domains of application range from marine construction, furniture manufacturing, industrial & residential construction and fine arts.
Apart from hydrophobic subtracts, the 1010 system is compatible with most supports such as wood, concrete, plaster, stone, ceramic, metal..etc. It can be highly diluted in water so its viscosity can result extremely low, resulting in a prime choice material for priming. It is used as wood primer on new woods & timbers but also as hardening material when applied of injected in old woods for conservation or purposes. Less diluted, it becomes a transparent varnish highly resistant to abrasion. It will enhance the colour of woods and other materials such as ceramics or carbon fibre.
Applied in maximum 2 thin layers, it’s micro-porosity to vapour will enable the 1010 to be used as a water barrier for materials that need to breath (wood, concrete).
 Download Data Sheet in PDF format (480.7 kb) 
|
2010 M25
FOAMING EPOXY SYSTEM
RESOLTECH 2010M25 is an epoxy foaming system formulated to fill voids and create a structural core. This enables manufacturers to produce complex shaped parts such as paddles, blades, rudders, fins. RESOLTECH 2010M25 produces a durable, homogeneus foam with low exothermy. RESOLTECH 2010M25 does not contains any CFC or banned chemical.
Download Data Sheet in PDF format (225.7 kb)
|
2010FC
EPOXY SELF-LEVELLING DECK COATING
Self extinguishing, self leveling. Corrosion resistant. High adhesion to metals. Replaces cement based products.
Download Data Sheet in PDF format (106.7 kb)
|
2010FGCS
Self-extinguishing epoxy gelcoat - conforming to marine, aeronautical and building construction regulations
RESOLTECH 2010FGCS-2014 FGC is a self-extinguishing epoxy that complies with the
OMI-SOLAS 2000 directive. Thanks to its viscosity, it is suitable for the application of both simple and complex forms. Once hardened, the parts can be released from the mould without post-curing. The optimal thermomechanical properties are obtained after an adapted cycle of curing. However, postcuring is NOT essential depending on the final use of the parts.
Download Data Sheet in PDF format (981.9 kb)
|
2010HP
Low density Epoxy Casting System
A Low density casting epoxy system with low exothermic peak, ambient temperature curing between 15 minutes to 10 hours depending on hardner
Download Data Sheet in PDF format (193.4 kb)
|
2080M25
Structural Epoxy Foaming system
RESOLTECH 2080 M25 is a liquid foaming epoxy casting system formulated to produce low density, closed cell, strutural cores. The slow, controled foaming reaction negates the use of mixing machines normally associated with PU foams – The low pressure of the foaming system will enable direct casting within the final parts with no conforming moulds and without alteration to the dimensions of the final composite piece. This system is available in black, white or neutral colour (to be pigmented with any colour)
Download Data Sheet in PDF format (180.8 kb)
|
2090 Deck Caulking
Epoxy System for Wood/Deck Caulking
The RESOLTECH 2090 is a casting epoxy system that hardens at ambient temperature and enables the realisation of superior wood deck caulking thanks to its high adhesion and mechanical resistance. The system has an excellent chemical resistance to UV exposure, detergents, solvents, petrol based products, acids or bases. It will not deteriorate under the use of deck cleaning products, avoiding to stain shoes or cloth.
Download Data Sheet in PDF format (481.3 kb)
|
3000T
EPOXY COATING SYSTEM
Resoltech 3000T BLANC/3005T is an epoxy coating with high chemical
and thermal resistance available in all RAL colors.
Thanks to it’s high dry extract content formulation, it is recommended
as semi-gloss finish-coat.
It is easily applied either with brushes, rollers or sprayed on all kind of
supports: steel, concrete, composites (polyesters and epoxies) and
wood.
Download Data Sheet in PDF format (22.6 kb)
|
3010P Yacht Filler
EPOXY PRIMER
RESOLCOAT 3010P is a 2 part epoxy primer providing high adhesion to steel and aluminium hulls as well as other boatbuilding materials. RESOLCOAT 3010P also acts as an anti-corrosion barrier. The system is easy to apply above and below the waterline by spray, roller or brush and is fast drying.
Download Data Sheet in PDF format (35.9 kb)
|
3010T
EPOXY HIGH BUILD SURFACER
RESOLCOAT 3010T is a high build surfacer formulated to create a barrier against water and chemicals to protect a yacht hull as well as providing a perfect surface finish and interface for all marine topcoats. The system is easy to apply by spray, roller or brush and is fast drying. A suitable finish is obtained after at least two coats of this system. Suitable for steel, aluminium, GRP and wooden yachts.
Download Data Sheet in PDF format (37.2 kb)
|
3020HP
EPOXY FILLER
RESOLCOAT 3020 HP is a lightweight epoxy filler formulated to fair and finish laminates and surfaces to a high standard. RESOLCOAT 3020 HP can be applied in thick layers, is easy to sand, water resistant and provides high resistance and durability. RESOLCOAT 3020 HP is suitable for both tooling and structural applications.
Download Data Sheet in PDF format (217.6 kb)
|
3040
COLD CURE EPOXY ADHESIVE PASTE
RESOLTECH 3040 is a high performance adhesive formulated for ambient temperature bonding. It is suitable for composites, PVC & honeycomb cores, steel, aluminium alloys and even concrete. 3040 is non-flammable, easy to use, does not require post curing and can be used to bond materials with different dilatation properties.
Download Data Sheet in PDF format (225.6 kb)
|
3500
Epoxy Adhesive for bonding materials with different dilatation coefficient ratios
The Resoltech 3500 epoxy adhesive cures at ambient temperature and enables the bonding of materials of different dilatations coefficient such as teak wood on composite, aluminium or steel hulls, steel on wood, etc.. It’s 40% elongation until break properties enable extremely strong and durable bonding with good chemical resistance.
Download Data Sheet in PDF format (101.6 kb)
|
3500 HP
Low Density Epoxy Adhesive paste
The Resoltech 3500 HP epoxy adhesive paste enables durable lightweight bonding of materials of different dilatations coefficient such as PVC core materials on composites structures, wood on composites, aluminium or steel. GRP laminates (polyester on polyester, vinylester on vinylester) bonded with the 3500 HP system will suffer delaminations before adhesive failure.
Download Data Sheet in PDF format (350.7 kb)
|
4020W
WATER BASED EPOXY FLOOR COATING
RESOLCOAT 4020W is a heavy duty floor coating available in a wide range of colours. It is self-leveling and easy to apply with a notched spreader. RESOLCOAT 4020W is a water based epoxy system. It is solvent free and not affected by residual moisture in the floor. Available with a non-slip additive (RESOLCOAT 4020W-GRIP).
Download Data Sheet in PDF format (95.8 kb)
|
4070
ANTI-CORROSION EPOXY COATING
RESOLCOAT 4070 is an anti-corrosion epoxy coating formulated to provide maximum resistance to chemicals. It is designed to be used as a protective liner for tanks and machinery in contact with aggressive chemicals. The system has a long pot life, is non-flammable and provides a smooth, non-porous high gloss finish. Can be applied by spray, roller and brush. Suitable for tanks containing petrol, kerosene, diesel, oils, heavy oil, acids and food grade products.
Download Data Sheet in PDF format (217 kb)
|
8020 EX
SURFACE FINISHING EPOXY FILLER
RESOLTECH 8020EX is a high performance epoxy filler formulated for the surface finishing of composite structures. It is easy to apply with a squeegee, easy to sand after cure, tough and durable for life. 8020 is suitable for marine structures, lightweight composite boats, windmill blades edges and all surface finishing applications.
Download Data Sheet in PDF format (217.5 kb)
|
IFRIT PR01
IFRIT PR01 is a high performance fire & heat protection material. It behaves as an active insulating coating, reacting to heat by developing an endothermic reaction without releasing any pollutants. The system may be applied onto composite materials, metal and other surfaces using a notched spreader or sprayed with an airless.
Download Data Sheet in PDF format (170.9 kb)
|
RE 3300
EPOXY ADHESIVE
RESOLTECH 3300 is a high chemical resistance epoxy adhesive that can be applied onto dry or damp surfaces but also underwater. RESOLTECH 3300 is used to seal, bond or repair a large selection of materials, including fiberglass,
aluminium, steel, concrete and ABS plastics.
Download Data Sheet in PDF format (170.2 kb)
|
|
|
